Three-phase motor MSP 712- 0.45/0.30 kW- 2/4pol-B34

€230.68*

Prices incl. VAT plus shipping costs

Delivery time about 3-4 business days

Product number:

2G2905A604A000

Shipping fees:

Article + Packaging

Downloads

Product information "Three-phase motor MSP 712- 0.45/0.30 kW- 2/4pol-B34"

Three-phase Electric motor, Power= 0.45/0.3 kW, Speed= 2/4 pole,

Type= B34, Voltage= 400 Volt, Frequency= 50 Hertz, Paint= RAL 5010 (gentian blue), Degree of protection = IP55,

Temperature sensor = 3 x PTC-Thermistors, Weight= 7.4 kg, Shaft= 14 x 30 mm, Terminal box position = top,

Cable glands = 1 x M20, 1 x M16, Housing = Die-cast aluminum, Insulation class = F (155°C),

Ball bearing= SKF, C & U or Equivalent, Cooling= axial fan (plastic),

The Electric motor is suitable for both directions of rotation.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified

specialist personnel. For modifications or special designs please send inquiry.

Helpful tips on electric motors can be found in the FAQ section. All product photos are non-binding examples!

We reserve the right to make technical changes.

Properties "Three-phase motor MSP 712- 0.45/0.30 kW- 2/4pol-B34"

Performance:	0,45/0,30 kW
Rotation speed:	3000/1500 rpm switchable
Shaft diameter:	14 mm
Type of construction:	B3 B14 (B34)

Accesories

Rain cover BG71

Fan cover with rain protection roof for Electric motors in size 71. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.

€39.56*

Details

PTC thermistor tripping device

PTC tripping device, motor protection, PTC evaluation AC 50/60Hz 115/120V-230/240V +-10% 3VA, IP20,1-9 PTC sensors according to DIN 44081, DIN 44082 in seriesContact: AC240V 2.5A C300- Dimensions: 68 x 33 x 53 mm (L x W x H) - Adapter for 35 mm standard rail- 2 holes for screw fastening UL File No. E75899

€48.59*

Details

Heating tape 56-90

Heating band for a standstill heater for electric motors of size 56-63-71-80-90 The standstill heater is used to prevent the formation of condensation during breaks in operation.

€123.11*

Details

External fan unit size 71

External fan, External fan unit, Motor size 71 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 35 watts, 0.19 A, 2950 rpm, 52 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.21 A, 3500 rpm, 52 m3/h, capacitor 3µF3x230/400 V-50 Hz, 30 watts, 0.19 A/0.12 A, 2900 rpm, 52 m3/h3x 254/460 V-60 Hz, 40 watts, 0.19/0.11, 3500 rpm, 52 m3/hPainted RAL5010, total length 185 mm, inner diameter 136 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From €179.69*

Details

Motor-slide-plate IEC63-80

Electric motor slide plate in size IEC 63 to 80 Dimensions: 210 x 195 x 33mm (LxWxH)Weight capacity: 25kgWeight: approx. 2.6kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

€70.11*

Details

Motor-slide-plate IEC63-100

Electric motor slide plate in size IEC 63 to 100 Dimensions: 270 x 195 x 33mm (LxWxH)Weight capacity: 44kgWeight: approx. 3kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

€78.50*

Details

Slide rails sice 63/71

Motor mounting rails for size 63 - 71 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 375 mmSlide length: 305 mmWeight: approx. 1.5 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

€51.80*

Details