Three-phase-motor- MS2 632- 0.18 kW- 4pol-B14

€68.79*

Prices incl. VAT plus shipping costs

Delivery time about 3-4 business days

Product number:

2X27031103A000

Shipping fees:

Article + Packaging

Downloads

Product information "Three-phase-motor- MS2 632- 0.18 kW- 4pol-B14"

Three-phase motor, Electric motor, Power= 0.18 kW, Speed= 4 pole

Type= B14, Shaft= 11 x 23 mm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),

Frequency= 50/60 Hertz, Efficiency class= IE2, Efficiency= 64.7 %. Paint= RAL 5010 (gentian blue),

Degree of protection = IP55, Temperature sensor = 3 x PTC-Thermistors, Weight= 4,2 kg, Terminal box position = top (rotatable),

Cable glands = 2 x M16, Housing = Die-cast aluminum, Insulation class = F (155°C),

Ball bearing= SKF, C & U, o. Equivalent, Cooling= axial fan (plastic), Motor feet= can be screwed or unscrewed.

The Electric motor is suitable for frequency converter use and for both directions of rotation.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified

specialist personnel. For modifications or special designs please send inquiry.

Helpful tips on electric motors can be found in the FAQ section. All product photos are non-binding examples!

We reserve the right to make technical changes.

Properties "Three-phase-motor- MS2 632- 0.18 kW- 4pol-B14"

Efficiency Class:	IE 2
Performance:	0,18 kW
Rotation speed:	1500 rpm / 4 polig
Shaft diameter:	11 mm
Size:	Standard
Type of construction:	B14

Accesories

Heating tape 56-90

Heating band for a standstill heater for electric motors of size 56-63-71-80-90 The standstill heater is used to prevent the formation of condensation during breaks in operation.

€123.11*

Details

External fan unit size 63

External fan, External fan unit, Motor size 63 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 35 watts, 0.15 A, 2950 rpm, 45 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.17 A, 3500 rpm, 45 m3/h, capacitor 3µF3x230/400 V-50 Hz, 30 watts, 0.18 A/0.10 A, 2950 rpm, 52 m3/hPainted RAL5010, total length 185 mm, inner diameter 120 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From €163.51*

Details

Frequency Inverter LS 0004S100-4EXFNS

Frequency inverter, 0.4 kW, 380V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning. Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€503.11*

Details

Frequency inverter LS 004M100

Frequency inverter , 0.4 kW, 230V, 2.4A, IP20, EMC filter integrated - EMC filter C2 - Potentiometer for speed control - Attachment to mounting plates or DIN rail - Side-by-side installation possible (2 mm distance between the FU) - Easy connection via RJ45 port - Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V) - Brake chopper for 1.5kW and 2.2kW versions - Overload capacity 150% for 1 min - Programming with DriveView9 operating software via RJ45 connection on the M100 (Advanced only! The standard version does not have an RJ45 interface! Please select version.) Excerpt from spec. Features: - DC braking - Jog operation - 3-wire operation - Dwell operation (dwell time operation) - Slip compensation - PID control - Energy saving operation - Speed search - Automatic restart 0.4kW frequency converter for 0.37 kW three-phase motor!

From €137.92*

Details

Thermal sensor opener NAT 130 ° C 1-fold up to BG63

PTO temperature monitoring of the motor winding

€38.57*

Details

Rain cover BG63

Fan cover with rain protection roof for Electric motors in size 63. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.

€33.87*

Details

PTC thermistor tripping device

PTC tripping device, motor protection, PTC evaluation AC 50/60Hz 115/120V-230/240V +-10% 3VA, IP20,1-9 PTC sensors according to DIN 44081, DIN 44082 in seriesContact: AC240V 2.5A C300- Dimensions: 68 x 33 x 53 mm (L x W x H) - Adapter for 35 mm standard rail- 2 holes for screw fastening UL File No. E75899

€48.59*

Details

Frequency Inverter LS 0004S100-4EOFNS

Frequency inverter, VFD, 0.4kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€270.89*

Details

Spezial flange B14-big BG63

Special flange for Electro motors the size 63 Flange B14 in big version.Ø120 x 80 x 100 mm, (P x N x M)screw thread= 4 x M6 The special flanges do not fit the motors in a reduced size! ! only surcharge in exchange - not available individually!

€21.62*

Details

400V motor switch, left/right rotation, on-off-stop

Motor switch, 400V, right-left rotation, on-off-stop Direction of rotation= right / left (can only be operated when stationary)Switch= on, off, quick stop, lockableMotor voltage= 3 x 400V Motor current= up to 9.0A (4kW with 4-pole motor)Circuit= undervoltage releaseCable length to motor= approx. 70cm with cable lugsHousing= polypropyleneProtection class= IP54 Plug= CEE 16A, 5-pole, 400VDimensions=175 x 95 112mmWeight= 550g Attention, no engine protection included!

€63.39*

Details

Cam switch left-zero-right

Cam switch up to 25A left-zero-right Reversing switch suitable for outdoor use Description: Rated current= 25A, operating voltage= 400V, housing= polycarbonate, Protection class= IP 65, switching angle= 60°L - 0 - R, dimensions: 113 x 113 x 135 mm

€73.45*

Details

Incremental encoder Nova+ IEC63

Power supply Ub=5 - 24V DC, Max. pulse frequency (kHz)=≤ 100, Max. speed (rpm)=6,000 (1,024 pulses), 3,000 (2,048 pulses), Output signals=A+B, -AB/90°, Pulses / Revolution=1 - 2,048, Interface=HTL (Push-Pull), TTL, Temperature range=-30°C to +80°C, External evaluations=NPN, PNP, RS422, Protection class=standard IP55, Connection cable PUR jacket 6 x 0.14 shielded, Certificates=CE, Please select the flange size. All product photos are non-binding examples! Technical changes reserved.

From €413.00*

Details

Incremental rotary encoder Basic IEC63

Incremental encoder with mounting flange Power supply UB=5 – 24 VDC, Max. pulse frequency=≤ 100 kHz Max. speed=6000 min-1, Output signals=A90°B Pulses per revolution=1 – 64, Temperature range=-30 °C – +80 °C Signal level=U high ≥ UB – 0.7V @ Llast ≤ 10 mA, U low ≤ 0.7V @ L load ≤ 10 mA Load capacity of the outputs=≤ 30 mA @ UB=5 VDC ≤ 20 mA @ UB=24 VDC Interface Interface=HTL (Push-Pull), external evaluations=NPN, PNP Connection cable=PUR jacket 4x0.14 mm2 shielded, Cable length=standard 2 m Certificates=CE, RoHs Please select the flange size. All product photos are non-binding examples! Technical changes reserved.

From €305.13*

Details

Absolute value rotary encoder AST IEC63

Power supply Ub=5 - 24V DC, Max. speed (rpm)=6000, External evaluations=RS422, Protection against polarity reversal=Yes, Measuring range=360°, Resolution (bit)=4 – 18, Linearity (25°C)=< 0.35°, Repeatability=≤ 0.1°, monoflop time typ/max (µs)=20, Temperature range=-30°C to +80°C, Protection class=standard IP55, Certificates=CE Please select the flange size. All product photos are non-binding examples! Technical changes reserved.

From €758.20*

Details

Shaft couplings

Claw couplings guarantee power transmission that dampens torsional vibrations. Impacts caused by power machines operating unevenly. In contrast to elastic Couplings whose intermediate links are subjected to bending and are therefore faster wear, the elastic teeth (elastomers) are only exposed to compressive stress. This means that the elastomer coupling has the advantage of being able to withstand significantly higher loads. This gives the elastomer coupling the advantage of being able to withstand significantly higher loads. The elastomers deform under load and at high speeds. Please click on the image to select the product.

From €40.46*

Details

Circuit breaker MS 0,25kW

Circuit breaker 0,25 kW (Current 0.63 – 1A) Depending on the equipment with or without insulating housing (please select). Connection type main circuit = screw connection Rated operational power at AC-3, 400 V Rated continuous current Iu=0,63-1 A Response current short-circuit release=12 A The Circuit breaker MS offer high current limit due to high breaking capacity optimum protection of motors and other consumers up to 32 A. They are with main switch and separating function equipped; the rated current ranges from 0,1 bis 32 A. All product photos are non-binding examples! Technical changes reserved.

From €49.69*

Details