Three-phase-motor- MS2 631- 0.18 kW- 2pol-B5
Three-phase motor, Electric motor, Power= 0.18 kW, Speed= 2 pole
Type= B5, Shaft= 11 x 23 mm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),
Frequency= 50/60 Hertz, Efficiency class= IE2, Efficiency= 60.4 %. Paint= RAL 5010 (gentian blue),
Degree of protection = IP55, Temperature sensor = 3 x PTC-Thermistors, Weight= 4 kg, Terminal box position = top (rotatable),
Cable glands = 2 x M16, Housing = Die-cast aluminum, Insulation class = F (155°C),
Ball bearing= SKF, C & U, o. Equivalent, Cooling= axial fan (plastic), Motor feet= can be screwed or unscrewed.
The Electric motor is suitable for frequency converter use and for both directions of rotation.
According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified
specialist personnel. For modifications or special designs please send inquiry.
Helpful tips on electric motors can be found in the FAQ section. All product photos are non-binding examples!
We reserve the right to make technical changes.
| Ambient temperature: | 40 °C |
|---|---|
| Breakdown to nominal torque (Mk/Mn): | 1,39 Nm |
| Direction of rotation: | Left, Right |
| Efficiency (100% / 75% / 50%): | 60,3 / 59,2 / 59,2 |
| Efficiency Class: | IE 2 |
| Engine protection: | PTC thermistor 3-fold |
| Flange dimensions: | 140 x 95 x 115 mm |
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Moment of inertia: | 0,00023 kgm² |
| Operating mode: | S1 |
| Performance: | 0,18 kW |
| Pick-up to rated current (la/In): | 3,38 A |
| Power factor: | 0,80 Cos φ |
| Protection class: | IP55 |
| Radialbelastung max.: | 7,20 N |
| Rotation speed: | 3000 rpm / 2 polig |
| Shaft diameter: | 11 mm |
| Shaft dimensions: | 11 x 23 mm |
| Size: | Standard |
| Tension: | 3 x 230/400 V |
| Tightening to nominal torque (MA/Mn): | 1,27 Nm |
| Type of construction: | B5 |
| Weight: | 4,2 kg |
Accesories
