Skip to main content Skip to search Skip to main navigation

Three phase motor M4 200Lx-37 kW-2pole-B35

Product information "Three phase motor M4 200Lx-37 kW-2pole-B35"

Electro motor, Three-phase motor, Power= 37 kW, Speed= 3000 rpm

Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz.

Efficiency class= IE4, Efficiency= 94,8%, Paint= RAL 7031 (blue grey), Degree of protection= IP55, Temperature sensor= 3 x PTC thermistors,

Weight= 264,0 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F (155°C), with relubrication device , 

Ball bearing= SKF or equivalent, Cooling= axial fan (Plastic), Motor feet= fixed potted (if present).

The engine mounting is designed for clutch operation. We recommend reinforced Cylindrical roller bearings for belt drives.

The Electric motor is suitable for frequency converter use and for both directions of rotation.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified

specialist personnel. For modifications or special designs please send inquiry.

All product photos are non-binding examples! Technical changes reserved.

Efficiency Class: IE 4
Performance: 37 kW
Rotation speed: 3000 rpm / 2 polig
Type of construction: B3 B5 (B35)
Properties "Three phase motor M4 200Lx-37 kW-2pole-B35"
Efficiency Class: IE 4
Performance: 37 kW
Rotation speed: 3000 rpm / 2 polig
Type of construction: B3 B5 (B35)

Accesories

Heating tape 160-225
Heating band for a standstill heater for electric motors of size 160-180-200-225 The standstill heater is used to prevent the formation of condensation during breaks in operation.

€187.16*
Cylindrical roller bearing BG200
Cylindrical roller bearing, A-side Reinforced bearing for electric motors of size 200. To accommodate increased radial loads. Minimum load of 20% required!

€188.04*
Thermal sensor opener NAT 130 ° C triple up to BG315
PTO temperature monitoring of the motor winding

€105.34*
PTC thermistor tripping device
Kaltleiterauslösegerät, Motorschutz, PTC-Auswertung Operating voltage:AC 220V Allowable volt tolerance:±20% Frequency:50~60Hz Self-consuming power:<0.8VA Allowable environment temperature:-30~70℃ Rated current of switch:7A Operating resistance:3KΩ (1±10%) Restoring resistance:1500~1800Ω Weight:0.2Kg

€48.59*
Frequency Inverter LS 0370S100-4EOFNS
Frequency inverter, VFD- 37kW, 380V- 400C- 420V- 480V, IP20, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection,Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)                               

€2,494.30*
CSA/UL certificate for cast iron motors
Certified and documented CSA/UL certificate 70197087 For gray cast iron motors up to IE3.

€130.55*