PV1101L.01-80-4-0.75 kW-242 rpm Planetary gearmotor
Downloads
Planetary gearmotor with IEC flange between gearbox and Three-phase motor
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.75 kW, Speed (n²)= 242 rpm, Ratio (i)= 6.00, Torque (M²)= 28 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 31 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearbox
avoid an overtemperature, a clarification in advance regarding the application is necessary.
Please send us this Form filled out and returned.
The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank.
Important instructions
This drive is a custom-made product. A resignation or revocation of the purchase is excluded!
All product photos are non-binding examples!
| Direction of rotation: | Left, Right |
|---|---|
| Engine protection: | PTC thermistor 3-fold |
| Frequency: | 50 Hz, 60 Hz |
| Operating mode: | S1 |
| Performance: | 0,75 kW |
| Rotation speed: | 201 to 300 rpm |
| Series: | P-series |
| Shaft diameter: | 50 mm |
| Torque: | 26 to 50 Nm |
| Type of construction: | Flange mounting |