1
2
3
4
5

MV-002-631 - 0.12kW-161rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 161 rpm, Ratio (i)= 8.45, Torque (M²)= 6 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €448.84*

Details

MV-002-631 - 0.12kW-244rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 244 rpm, Ratio (i)= 5.57, Torque (M²)= 4 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €448.84*

Details

MV-002-631 - 0.12kW-183rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 183 rpm, Ratio (i)= 7.45, Torque (M²)= 6 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €448.84*

Details

MV-002-631 - 0.12kW-298rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 298 rpm, Ratio (i)= 4.56, Torque (M²)= 3 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €448.84*

Details

MV-002-631 - 0.12kW-156rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 156 rpm, Ratio (i)= 8.7, Torque (M²)= 7 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €448.84*

Details

MV-002-632 - 0.25kW-487rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.25 kW, Speed= 487 rpm, Ratio (i)= 5.57, Torque (M²)= 4 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.4kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €450.00*

Details

MV-002-632 - 0.25kW-392rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.25 kW, Speed= 392 rpm, Ratio (i)= 6.91, Torque (M²)= 6 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.4kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €450.00*

Details

MV-002-632 - 0.25kW-749rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.25 kW, Speed= 749 rpm, Ratio (i)= 3.62, Torque (M²)= 3 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.4kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €450.00*

Details

MV-002-632 - 0.25kW-452rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.25 kW, Speed= 452 rpm, Ratio (i)= 6.0, Torque (M²)= 5 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.4kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €450.00*

Details

MV-002-632 - 0.25kW-594rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.25 kW, Speed= 594 rpm, Ratio (i)= 4.56, Torque (M²)= 4 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.4kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €450.00*

Details

MV-002-632 - 0.18kW-346rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 346 rpm, Ratio (i)= 3.90, Torque (M²)= 5 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €454.06*

Details

MV-002-632 - 0.18kW-373rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 373 rpm, Ratio (i)= 3.62, Torque (M²)= 4 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €454.06*

Details

MV-002-632 - 0.18kW-225rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 225 rpm, Ratio (i)= 6.0 Torque (M²)= 7 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €454.06*

Details

MV-002-632 - 0.18kW-181rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 181 rpm, Ratio (i)= 7.45, Torque (M²)= 9 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €454.06*

Details

MV-002-632 - 0.18kW-160rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 160 rpm, Ratio (i)= 8.45, Torque (M²)= 10 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €454.06*

Details

MV-002-632 - 0.18kW-137rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 137 rpm, Ratio (i)= 9.87, Torque (M²)= 11 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €454.06*

Details

MV-002-632 - 0.18kW-155rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 155 rpm, Ratio (i)= 8.7, Torque (M²)= 10 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €454.06*

Details

MV-003-631 - 0.12kW-100rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 100 rpm, Ratio (i)= 13.61, Torque (M²)= 10 Nm, Service factor (fs)= 7.8. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.2kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €456.34*

Details

MV-003-631 - 0.12kW-48rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 48 rpm, Ratio (i)= 28.38, Torque (M²)= 21 Nm, Service factor (fs)= 3.8. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.2kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €456.34*

Details

MV-003-631 - 0.12kW-34rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 34 rpm, Ratio (i)= 40.04, Torque (M²)= 30 Nm, Service factor (fs)= 2.7. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.2kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €456.34*

Details

MV-003-631 - 0.12kW-66rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 66 rpm, Ratio (i)= 20.66, Torque (M²)= 16 Nm, Service factor (fs)= 5.2. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.2kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €456.34*

Details

MV-003-631 - 0.12kW-64rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 64 rpm, Ratio (i)= 21.26, Torque (M²)= 16 Nm, Service factor (fs)= 5.1. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.2kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €456.34*

Details

MV-003-631 - 0.12kW-56rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 56 rpm, Ratio (i)= 24.13, Torque (M²)= 18 Nm, Service factor (fs)= 4.5. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.2kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €456.34*

Details

MV-003-631 - 0.12kW-80rpm Helical-Gear-Motor

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 80 rpm, Ratio (i)= 16.89, Torque (M²)= 13 Nm, Service factor (fs)= 6.4. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.2kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!

From €456.34*

Details

1
2
3
4
5

Geared motors in special versions

JS-Technik GmbH is specialized on a wide range of challenges in the professional drive technology field with a focus on electric motors, frequency inverters and geared motors.

Geared motors powers

On the pages of our geared motors online shop, you find a selection of spur gear motors with very different speeds expressed in rpm (i.e. rev/min or min^-1) Available are common sizes and motor powers of 0.12 kW, 0.18 kW, 0.25 kW, 0.55 kW, 0.75 kW, 1.1 kW, 1.5 kW, 2.2 kW, 3 kW, 4 kW, 5.5 kW, 7.5 kW, 11 kW, 15 kW, 18.5 kW, 22 kW, 30 kW, 45 kW, 55 kW, 75 kW and 90.0 kW.

Geared Motor + Frequency Inverter

Mounting positions of the drives

A JS-Technik professional geared motor can be mounted in any position required such as, for example, horizontally or vertically, to match your needs. Based on a high degree of interchangeability of geared motor components, you will benefit from greater flexibility of construction options available, reduced costs, shorter delivery times and simpler maintenance.

Geared Motor with foot + flange (B35)

Helical gear drives with their advantages

Helical gear drives are available in various speeds, i.e. from less than 1 up to 1000 revolutions per minute (rpm, rev/min, min¹). Helical geared motors are frequently also designed to match customer’s individual requirements. With decades of experience and our own final assembly, we are a perfect partner for businesses that need external expertise in a large spectrum of issues. Due to their high quality, our geared motors require little maintenance, ensure high availability and hence high operational reliability.

Helical bevel geared motor

Helical gear drive + motor

Whether it is a geared motor with brake motor, a special shaft, specific supply voltage, a spur gear motor or explosion protected design – our focus is on premium quality, a competent team and a price that conforms to the market.

Your partner for geared motors

If you do not find your geared motor here in our online shop, please do not hesitate to contact us via email or by phone. For large quantities in the B2C or B2B range, simply let us know how many you need so we can send you a top quote.

SEO= Spur gear motors from stock! Geared motors in special versions