Worm variable speed gear motor, Power= 0.18 kW, Speed= 17 - 88 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, Iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 415 mm, Hollow shaft= 18 mm, Motor Speed= 4 poles, Translation with adjustment unit (i)= 16 - 82 Gear ratio only worm gear (i)= 10, Torque= 12 Nm - 23 Nm, Service factor (f.s.)= 1, Terminal box= on top (rotatable), Weight= 12 kg, Color= RAL 5010 (gentian blue), Temperature sensor= 3 x PTC thermistor, gearbox housing= aluminium, ball bearing= SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive complies with IEC 60034-30:2008, is suitable for both directions of rotation and contains an oil filling on delivery. Open hollow shafts are marked with to be closed with a cover cap. This can be ordered under the heading "Accessories". According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel.   As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, power= 0.18 kW, speed= 22.5 - 117 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% in accordance with VDE 0530), protection class= IP55, Insulation class= F (155°C), operating mode= S1, duty cycle= S1- 100%, total length= approx. 415 mm, Hollow shaft= 18 mm, motor speed= 4 pole, gear ratio with adjustment unit (i)= 12 - 61.5Gear ratio only worm gear (i)= 7.5, torque= 9 Nm - 18 Nm, operating factor (f.s.)= 1. Terminal box = top (rotatable), weight = 12 kg, color = RAL 5010 (gentian blue), Temperature sensor = 3 x PTC thermistors, gear housing = aluminum, ball bearings = SKF, C&U or equivalent, Cooling = axial fan (plastic). The drive complies with IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts must be closed with a cover cap. This can be ordered under the "Accessories" section. In accordance with VDE 0105 or. According to IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel. As is usual with variable speed drives, speed control by turning the handwheel is only permitted during operation! A speed change when the drive is at a standstill can lead to damage to the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, Power= 0.18 kW, Speed= 8.5 - 44 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, Iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 415 mm, Hollow shaft= 18 mm, Motor Speed= 4 poles, Gear ratio with adjustment unit (i)= 32 - 164 Gear ratio only worm gear (i)= 20, Torque= 22 Nm - 40 Nm, Operating factor ( f.s.)= 1, Terminal box= above (rotatable), Weight= 12 kg, Color= RAL 5010 (gentian blue), Temperature sensor= 3 x PTC Thermistor, Gear housing = aluminum, Ball bearing = SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with a cover cap. This can be ordered under the heading "Accessories". According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel. As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, power= 0.18 kW, speed= 4.5 - 22 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% in accordance with VDE 0530), Protection class= IP55, insulation class= F (155°C), operating mode= S1, duty cycle= S1- 100%, total length= approx. 415 mm, Hollow shaft= 18 mm, motor speed= 4 pole, gear ratio with adjustment unit (i)= 46 - 328, Gear ratio only worm gear (i)= 40, torque= 37 Nm – 62 Nm, operating factor (f.s.)= 1, Terminal box = top (rotatable), weight = 12 kg, color = RAL 5010 (gentian blue), Temperature sensor = 3 x PTC thermistors, gear housing = aluminum, ball bearings = SKF, C&U or equivalent, Cooling = axial fan (plastic). The drive complies with IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts must be closed with a cover cap. This can be ordered under the "Accessories" section. In accordance with VDE 0105 or. IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel. As is usual with variable speed drives, speed control by turning the handwheel is only permitted during operation! A speed change when the drive is at a standstill can lead to damage to the stepless adjustment unit.   All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, power= 0.18 kW, Speed= 6 - 29 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 415 mm, Hollow shaft = 18 mm, motor speed = 4 poles, translation with adjustment unit (i) = 48 - 246 Transmission only worm gear (i) = 30, torque = 30 Nm - 51 Nm, service factor ( f.s.)= 1, terminal box= above (rotatable), weight= 12 kg, color= RAL 5010 (gentian blue), temperature sensor= 3 x PTC thermistor, gear housing = aluminum, ball bearing = SKF, C&U or equivalent, Cooling=axial fan (plastic). The drive complies with IEC 60034-30:2008, is suitable for both directions of rotation and includes an oil filling upon delivery. Open hollow shafts are included to be closed with a cover cap. This can be ordered under the “Accessories” section. According to VDE 0105 or IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel. As is usual with variable speed gearboxes, speed control by turning the handwheel is only permitted during operation! A change in speed while at a standstill can lead to damage to the continuously variable adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, Power= 0.18 kW, Speed= 3.5 - 17.5 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, Iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 415 mm, Hollow shaft = 18 mm, Motor speed = 4 poles, Translation with adjustment unit (i) = 80 - 410 Transmission only worm gear (i) = 50, Torque = 43 Nm - 60 Nm, Service factor ( f.s.)= 1, Terminal box= above (rotatable), Weight= 12 kg, Color= RAL 5010 (gentian blue), Temperature sensor= 3 x PTC Thermistor, Gear housing = Aluminum, Ball bearing = SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with a cover cap. This can be ordered under the heading "Accessories". According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel. As usual with variable speed gears, speed control by turning the hand wheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

worm variable speed gear motor, Power= 0.18 kW, Speed= 11.5 - 58 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, Iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 415 mm, Hollow shaft= 18 mm, Motor Speed= 4 poles, Gear ratio with adjustment unit (i)= 24 - 123Gear ratio only worm gear (i)= 15, Torque= 17 Nm - 32 Nm, Service factor ( f.s.)= 1. Terminal box= above (rotatable), Weight= 12 kg, Color= RAL 5010 (gentian blue), Temperature sensor= 3 x PTC thermistor, Gear housing = aluminum, Ball bearing = SKF, C&U or equivalent, Cooling=axial fan (plastic). The drive complies with IEC 60034-30:2008, is suitable for both directions of rotation and includes an oil filling upon delivery. Open hollow shafts are included to be closed with a cover cap. This can be ordered under the “Accessories” section. According to VDE 0105 or IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel. As is usual with variable speed gearboxes, speed control by turning the handwheel is only permitted during operation! A change in speed while at a standstill can lead to damage to the continuously variable adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, Power= 0.18 kW, Speed= 7 - 35 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 415 mm, Hollow shaft= 18 mm, motor Speed= 4 poles, gear ratio with adjustment unit (i)= 40 - 205 Gear ratio only worm gear (i)= 25, torque= 27 Nm - 47 Nm, service factor ( f.s.)= 1, terminal box= above (rotatable), weight= 12 kg, color= RAL 5010 (gentian blue), temperature sensor= 3 x PTC thermistor, gear housing = aluminum, ball bearing = SKF, C&U or equivalent, Cooling=axial fan (plastic). The drive complies with IEC 60034-30:2008, is suitable for both directions of rotation and includes an oil filling upon delivery. Open hollow shafts are included to be closed with a cover cap. This can be ordered under the “Accessories” section. According to VDE 0105 or IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel. As is usual with variable speed gearboxes, speed control by turning the handwheel is only permitted during operation! A change in speed while at a standstill can lead to damage to the continuously variable adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm Gear Motor, Power= 0,18 KW, Speed= 9 to 110 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 14mm, Engine Speed= 4 pole, Ratio (i)= 15, Torque= 14 Nm,Service factor (f.s.)= 1,3 . Terminal box= top (rotatable), Weight= 6 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 14 to 168 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 14mm, Engine Speed= 4 pole, Ratio (i)= 10, Torque= 10 Nm,Service factor (f.s.)= 1,8 . Terminal box= top (rotatable), Weight= 6 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 28 to 336 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 14mm, Engine Speed= 4 pole, Ratio (i)= 5, Torque= 5,3 Nm,Service factor (f.s.)= 3,4 . Terminal box= top (rotatable), Weight= 6 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm variable speed gear motor, Power= 0.18 kW, Speed= 2.5 - 11 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 459 mm, Hollow shaft= 25 mm, Motor Speed= 4 poles, Gear ratio with adjustment unit (i)= 128 - 656 Gear ratio only worm gear (i)= 80, Torque= 59 Nm – 82 Nm, Service factor ( f.s.)= 1, Terminal box= above (rotatable), Weight= 13 kg, Color= RAL 5010 (gentian blue), Temperature sensor= 3 x PTC thermistors, Gear housing = aluminum, Ball bearing = SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with a cover cap. This can be ordered under the heading "Accessories". According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel. As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, Power= 0.18 kW, Speed= 4.5 - 22 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 459 mm, Hollow shaft= 25 mm, motor Speed= 4 poles, gear ratio with adjustment unit (i)= 64 - 328 Gear ratio only worm gear (i)= 40, torque= 38 Nm - 63 Nm, operating factor ( f.s.)= 1, terminal box= above (rotatable), weight= 13 kg, color= RAL 5010 (gentian blue), temperature sensor= 3 x PTC thermistors, gear housing = aluminum, ball bearing = SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with a cover cap. This can be ordered under the heading "Accessories". According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel. As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, Power= 0.18 kW, Speed= 3 - 14.5 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, Iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 459 mm, Hollow shaft = 25 mm, Motor speed = 4 poles, Translation with adjustment unit (i) = 96 - 492 Transmission only worm gear (i) = 60, torque = 50 Nm - 80 Nm, Service factor ( f.s.)= 1, Terminal box= above (rotatable), Weight= 13 kg, Color= RAL 5010 (gentian blue), temperature sensor= 3 x PTC thermistors, gear housing = aluminum, ball bearing = SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with a cover cap. This can be ordered under the heading "Accessories". According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel. As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, power= 0.18 kW, speed= 2 – 8.5 rpm Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% in accordance with VDE 0530), Protection class= IP55, insulation class= F (155°C), operating mode= S1, duty cycle= S1- 100%, total length= approx. 459 mm, Hollow shaft= 25 mm, motor speed= 4 pole, gear ratio with adjustment unit (i)= 160 - 820,Gear ratio only worm gear (i)= 100, torque= 66 Nm – 79 Nm, operating factor (f.s.)= 1, Terminal box= top (rotatable), weight= 13 kg, color= RAL 5010 (gentian blue), Temperature sensor= 3 x PTC thermistors, gear housing= aluminum, ball bearings= SKF, C&U or equivalent, Cooling= axial fan (plastic). The drive complies with IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts must be closed with a cover cap. This can be ordered under the "Accessories" section. In accordance with VDE 0105 or. According to IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel. As is usual with variable speed drives, speed control by turning the handwheel is only permitted during operation! A speed change when the drive is at a standstill can lead to damage to the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, Power= 0.18 kW, Speed= 3.5 - 17.5 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 459 mm, Hollow shaft= 25 mm, motor Speed= 4 poles, gear ratio with adjustment unit (i)= 80 - 410 Gear ratio only worm gear (i)= 50, torque= 44 Nm - 73 Nm, operating factor ( f.s.)= 1, terminal box= above (rotatable), weight= 13 kg, color= RAL 5010 (gentian blue), temperature sensor= 3 x PTC thermistors, gear housing = aluminum, ball bearing = SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with a cover cap. This can be ordered under the heading "Accessories". According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel. As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm Gear Motor, Power= 0,18 KW, Speed= 6 to 67 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 25, Torque= 23 Nm,Service factor (f.s.)= 1,7 . Terminal box= top (rotatable), Weight= 6,8 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 4 to 42 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 40, Torque= 32 Nm,Service factor (f.s.)= 1,3 . Terminal box= top (rotatable), Weight= 6,8 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples! Technical changes reserved.

Worm Gear Motor, Power= 0,37 KW, Speed= 14 to 168 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 10, Torque= 21 Nm,Service factor (f.s.)= 1,9 . Terminal box= top (rotatable), Weight= 8,3 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environmentson. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).                  ! Possible variant selection!      Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,37 KW, Speed= 9 to 110 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 15, Torque= 31 Nm,Service factor (f.s.)= 1,3 . Terminal box= top (rotatable), Weight= 8,3 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,37 KW, Speed= 28 to 336 rpmDegree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 5, Torque= 11 Nm,Service factor (f.s.)= 3 . Terminal box= top (rotatable), Weight= 8,3 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 4 to 42 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 40, Torque= 33 Nm,Service factor (f.s.)= 2,3 . Terminal box= top (rotatable), Weight= 8 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm variable speed gear motor, Power= 0.25 kW, Speed= 27 - 133 Rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 453 mm, Hollow shaft = 18 mm, Motor speed = 4 poles, Translation with adjustment unit (i) = 10.5 - 52.5 Transmission only worm gear (i) = 7.5, Torque = 13 Nm - 30 Nm, Service factor (f.s.)= 1, Terminal box= above (rotatable), Weight= 14 kg, Color= RAL 5010 (gentian blue), Temperature sensor= 3 x PTC thermistors, Gearbox housing = aluminium, Ball bearings = SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with a cover cap. This can be ordered under the heading "Accessories". In accordance with VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel. As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.

Worm variable speed gear motor, Power= 0.25 kW, Speed= 7 - 33 rpm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection type= IP55, Iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 453 mm, Hollow shaft = 18 mm, Motor speed = 4 poles, Translation with adjustment unit (i) = 42 - 210 Transmission only worm gear (i) = 30, Torque = 43 Nm - 89 Nm, Service factor ( f.s.)= 1, Terminal box= above (rotatable), Weight= 14 kg, Color= RAL 5010 (gentian blue), Temperature sensor= 3 x PTC Thermistors, Gear housing = aluminum, Ball bearing = SKF, C&U or equivalent, Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008, is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with a cover cap. This can be ordered under the heading "Accessories". In accordance with VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel. As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation! A change in speed while stationary can damage the stepless adjustment unit. All product photos are non-binding examples! Technical changes reserved.