MV002-DC350-2, 24V, 0.50kW, 657 rpm, IP66 spur gear motor

From €893.84*

Prices incl. VAT plus shipping costs

Delivery time on demand

Mounting position for gearmotors

Type of construction

Product number:

A00021F068000046A208OM

Downloads

Product information "MV002-DC350-2, 24V, 0.50kW, 657 rpm, IP66 spur gear motor"

Spur gear motor with DC Motor, IP66, power= 0.50 kW (S2 operation), Speed= 657 rpm

Voltage= 24 volts DC, Degree of protection= Gearbox IP55, Motor IP66, Current consumption= 24V/29.4A,

Operating mode= S2 (short-time operation), Shaft= 20mm x 40mm, Motor speed= 2 pole, Translation (i)= 4.56,

Torque= 21.0Nm, Service factor (fs)= 3.8, Connection= clamping bolt, Weight= 16.3kg

An external speed control is available as an option. The gearbox can be operated in both directions of rotation

and includes an oil fill upon delivery. In accordance with VDE 0105 and IEC 364, all work on the

Electrical drive to be carried out only by qualified specialist personnel.

All product photos are non-binding examples! Technical changes reserved.

When ordering, please select the desired installation position and design!

Properties "MV002-DC350-2, 24V, 0.50kW, 657 rpm, IP66 spur gear motor"

Performance:	0,50 kW
Protection class:	IP66
Rotation speed:	501 to 1000 rpm
Series:	M-series
Shaft diameter:	20 mm
Tension:	24 V DC
Torque:	11 to 25 Nm

Zubehör

DC motor control 20 A without control box

Speed control for DC motors The PLN20 speed control is suitable for DC motors up to 350 W / 20 A.Extensive control variants of the DC motor are possible. These can be found in the catalog included in the download. Motor start and stop times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Special features:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:146 mm x 177 mm x 34 mm Attention: Individual electrical protection must be carried out on site by qualified personnel! Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

€420.31*

Details

DC motor control 20 A without control box

Speed control for DC motors The PLN40 speed control is suitable for DC motors up to500 W / 40 A.Extensive control variants of the DC motor are possible. These can be found in the catalog included in the download. Dimensions: 146 mm x 177 mm x 34 mm DC Motor on and off times:- Acceleration time: 0.5 - 10 sec- Deceleration time: 0.5 - 10 sec Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

€493.14*

Details

DC-Motorsteuerung-Drehzahlregler-Gleichstrommotoren-Schaltkasten

DC motor control 20 A with control box

Speed control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5–10 kΩ), left-off-right rotation switch and motor control mounted in the control box. The speed control is suitable for DC motorsup to 350 W / 20 A . Motor switch-on and switch-off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Special features:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350 mm x 250 mm x 155 mmAttention: Individual electrical protection must be carried out on site by qualified personnel! Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

€907.86*

Details

DC motor control 20 A with control box

Speed control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5–10 kΩ), left-off-right rotation switch and motor control mounted in the control box. The speed control is suitable for DC motorsup to 500 W / 40 A . Motor switch-on and switch-off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Special features:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350 mm x 250 mm x 155 mmAttention: Individual electrical protection must be carried out on site by qualified personnel! Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

€1,067.43*

Details