MV-F273-80-0.55kW-15 rpm Helical Geared Motor
Product number:
C0273306100965A000TM
Shipping fees:
Article + Packaging
Downloads
- JS- MVF272 / MVF273- Maßzeichnung / Drawing
- JS- Elektromotor- MX2 801- Datenblatt / Data sheet
- JS- MVF272 / MVF273- MX801- Step
- JS- M Serie- Katalog / Catalog
- JS- MV / NV - Betriebsanleitung
- JS- MV / NV - Operation instructions
- JS- Elektromotoren- Betriebsanleitung
- JS- Electric motors- Operation instructions
Product information "MV-F273-80-0.55kW-15 rpm Helical Geared Motor"
Helical geared motor with possibility of flange mounting from B3 to B35
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,55 kW, Speed= 15 upm, Ratio (i)= 96,52, Torque (M²)= 339 Nm, Service factor (fs)= 1,3,
Type = B3 (B35 for an extra charge), Shaft= 35x70 mm.
Weight= 34,1 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, Terminal box = top (rotatable).
The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by
qualified specialist personnel. For modifications or special designs please send inquiry.
All product photos are non-binding examples! Technical changes reserved.
When ordering, please select the desired mounting position and design!
Properties "MV-F273-80-0.55kW-15 rpm Helical Geared Motor"
| Delivery time: | 1 week |
|---|---|
| Performance: | 0,55 kW |
| Rotation speed: | 11 to 50 rpm |
| Series: | M-series |
| Shaft diameter: | 35 mm |
| Torque: | 301 to 400 Nm |
Accesories
Frequency inverter LS 008M100
Frequency inverter , 0.75 kW, 230V, 4.2A, IP20, EMC filter integrated
- EMC filter C2- Potentiometer for speed control- Attachment to mounting plates or DIN rail- Side-by-side installation possible (2 mm distance between the FU)- Easy connection via RJ45 port- Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V)- Brake chopper for 1.5kW and 2.2kW versions- Overload capacity 150% for 1 min- Programming with DriveView9 operating software via RJ45 connection on the M100(Advanced only! The standard version does not have an RJ45 interface! Please select version.)
Excerpt from spec. Features:- DC braking- Jog operation- 3-wire operation- Dwell operation (dwell time operation)- Slip compensation- PID control- Energy saving operation- Speed search- Automatic restart
0.75kW frequency converter , single-phase (1 x 220 / 230 / 240 V)
From
€157.41*
Frequency inverter LS 0008-iS7-4-SPFD
€721.89*
Frequency inverter iS7 – the all-rounder
0.8 kW, 3x400V, 2.5A, Braking resistor, EMC filter, IP54 , DC reactor, with control panel.
● Constant torque / variable torque for normal load and heavy load operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high-speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Delay of undervoltage trip) Under Load Trip ProtectionPMSM function (Permanent Magnet Synchronous Motor) Vector control without feedbackPower Braking & Flux Braking Function Automatic Setting:Autotuning of static engine parameters
● Easy to use:simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP]) *● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30PS])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic LCD control panel (6 different languages)● PLC PLC expansion card optional (Programmable Logic Control Card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/Output expansion card (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *● Software (Drive View) for monitoring and parameterization on the PC
Frequency Inverter LS 0008S100-4EOFNS
€286.33*
Frequency inverter, VFD, 0.8 kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3)
0.1-400Hz frequency output
1-15kHz carrier frequency
Constant torque / Variable torque dual rating
Selectable V/f and sensorless vector control
Powerful torque at overall Speed range
Fault history: Last 5 faults
High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning
Enhanced process PID control with Sleep & Wake-up functions
Low leakage PWM algorism
Available IP66 enclosure (0.4-22kW) as built-in option
Built-in Dynamic braking transistor (0.75-22kW)
Available EMC Filter & DC Reactor as built-in option
Wide graphic LCD keypad (30-75kW)
Remote control using external wide graphic LCD keypad
Cooling fan On/Off control & Easy change
Extension I/O boards (Optional): 11 max. inputs & 6 max outputs
0-10Vdc / -10-+10Vdc analog input
Selectable PNP/NPN input signal
Built-in RS485 (LS Bus / Modbus RTU) communication
Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen
Monitoring & commissioning PC based software tool (Drive View)
Frequency inverter LS 0008-iS7-4-SOFD
€455.19*
Frequency inverter iS7 – the all-rounder
0.8 kW, 3x400V, 2.5A, Braking resistor, EMC filter, IP21 , intermediate circuit choke (DC reactor), with control panel.
● Constant torque / variable torque for normal load and heavy load operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high-speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Delay of undervoltage trip) Under Load Trip ProtectionPMSM function (Permanent Magnet Synchronous Motor) Vector control without feedbackPower Braking & Flux Braking Function Automatic Setting:Autotuning of static engine parameters
● Easy to use:simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP]) *● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30PS])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic LCD control panel (6 different languages)● PLC PLC expansion card optional (Programmable Logic Control Card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/Output expansion card (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *● Software (Drive View) for monitoring and parameterization on the PC
Frequency Inverter LS 008-G100-4
€256.83*
Frequency inverter, 0.75kW, 380V- 480V, 1,3A, IP20, including operation panel
• V/f control, sensorless vector control selectable• PID controller for advanced process control• High torque throughout the engine speed range• 0.1-400Hz output frequency• 1-15kHz clock frequency• Input voltage range -15% to +10%• Error register: last 5 errors• Analog input 0 to +10Vdc / -10 to +10Vdc• 150% torque at 0.5Hz• Degree of protection IP20, UL type 1 (optional)• Torque amplification (boost) manual/automatic• Input signal PNP/NPN selectable• Control and parameter setting for a second motor• Integrated dynamic braking transistor as standard• Automatic tuning: motor vector measurement and autotuning• Integrated communication RS485 (LS Bus / Modbus RTU) with RJ45• Fan with on/off control, easily replaceable
External fan unit size 80
External fan, External fan unit, Motor size 80
Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage.
1x230 V-50 Hz, 35 watts, 0.19 A, 2950 rpm, 58 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.21 A, 3500 rpm, 58 m3/h, capacitor 3µF3x230/400 V-50 Hz, 35 watts, 0.19 A/0.12 A, 2900 rpm, 58 m3/h3x 254/460 V-60 Hz, 45 watts, 0.19/0.11, 3500 rpm, 58 m3/hPainted RAL5010, total length 185 mm, inner diameter 156 mm
To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.
From
€189.69*
Frequency Inverter LS 0008S100-4EXFNS
€520.08*
Frequency inverter, 0.8 kW, 380V- 480V, IP66, built- in LED keypad, EMC filter (C3)
0.1-400Hz frequency output
1-15kHz carrier frequency
Constant torque / Variable torque dual rating
Selectable V/f and sensorless vector control
Powerful torque at overall Speed range
Fault history: Last 5 faults
High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning
Enhanced process PID control with Sleep & Wake-up functions
Low leakage PWM algorism
Available IP66 enclosure (0.4-22kW) as built-in option
Built-in Dynamic braking transistor (0.75-22kW)
Available EMC Filter & DC Reactor as built-in option
Wide graphic LCD keypad (30-75kW)
Remote control using external wide graphic LCD keypad
Cooling fan On/Off control & Easy change
Extension I/O boards (Optional): 11 max. inputs & 6 max outputs
0-10Vdc / -10-+10Vdc analog input
Selectable PNP/NPN input signal
Built-in RS485 (LS Bus / Modbus RTU) communication
Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen
Monitoring & commissioning PC based software tool (Drive View)