Go to homepage
€0.00*

KV103-DC600-2-0.8 kW-47 U/min Bevel gear motor

€1,141,805.00*

Prices incl. VAT plus shipping costs

Delivery time Approx. 36 working days

Product number: KV103169000628A206OM

Product information "KV103-DC600-2-0.8 kW-47 U/min Bevel gear motor"

Bevel gear motor with DC motor, IP66, power= 0.8 kW (S2 operation), speed = 47 rpm

Voltage= 12 or 24 volts DC, protection class= gearbox IP55, motor IP66, current consumption= 12V/94.4 A, 24V/47.2 A,

Operating mode= S2 (short-term operation), hollow shaft= 30 mm, motor speed= 2 poles, gear ratio (i)= 62.79,

Torque= 144 Nm, service factor (fs)= 1.0, connection= clamping bolt, weight= 17.0 kg.

An external speed control is optionally available. The gearbox can be operated in both directions of rotation

and is supplied with an oil filling. According to VDE 0105 and IEC 364, all work on the

electric drive may only be carried out by qualified specialist personnel.

 



All product photos are non-binding examples! Technical changes reserved.

When ordering, please select the desired installation position and version!

Performance: 0,80 kW
Rotation speed: 11 to 50 rpm
Series: K-series
Shaft diameter: 30 mm
Torque: 101 to 200 Nm
Properties "KV103-DC600-2-0.8 kW-47 U/min Bevel gear motor"
Performance: 0,80 kW
Rotation speed: 11 to 50 rpm
Series: K-series
Shaft diameter: 30 mm
Torque: 101 to 200 Nm

Accesories

slide 9 to 13 of 10
KV 10X output shaft
KV 10X output shaft
Output shaft with key father for helical gear reducer KV102 and KV103. 30 x 60 mm The shaft is permanently installed and can only be ordered with geared motorPlease indicate the installation side (starting from installation position M1). All product photos are non-binding examples!

€45.26*
Details
KV 10X double output shaft
KV 10X double output shaft
Double output shaft with key father for helical gear reducer KV102 and KV103. 30 x 60 mm The shaft is permanently installed and can only be ordered with geared motor All product photos are non-binding examples!

€57.87*
Details
Schnecke Ausgangsflansch
KV 10X output flange
Output flange for helical gear reducer KV102 and KV103. All product photos are non-binding examples! Technical changes reserved.

€62.72*
Details
KV 10X output shaft, flange
KV 10X output shaft, flange
Output shaft with key father for helical gear reducer KV102 and KV103. 30 x 60 mm The shaft is permanently installed and can only be ordered with geared motor + flange.. Please indicate the installation side (starting from installation position M1). All product photos are non-binding examples!

€52.04*
Details
KV 10X Double output shaft for flange
KV 10X Double output shaft for flange
Double output shaft with feather key for bevel gearboxes KV102 and KV103. 30x60mm The shaft is permanently installed and can only be ordered with a geared motor + flange. All product photos are non-binding examples! Technical changes reserved.

€59.81*
Details
KV 10X torque arm
KV 10X torque arm
Torque arm for helical gear reducer KV102 and KV103. All product photos are non-binding examples! Technical changes reserved.

€53.03*
Details
DC-Motorsteuerung-Drehzahlregler
DC motor control 40 A without control box
Speed ​​control for DC motors The PLN40 speed control is suitable for DC motors up to500 W / 40 A.Extensive control variants of the DC motor are possible. These can be found in the catalog included in the download. Dimensions: 146 mm x 177 mm x 34 mm DC Motor on and off times:- Acceleration time: 0.5 - 10 sec- Deceleration time: 0.5 - 10 sec   Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

€493.14*
Details
DC-Motorsteuerung-Drehzahlregler
DC motor control 20 A without control box
Speed ​​control for DC motors The PLN20 speed control is suitable for DC motors up to 350 W / 20 A.Extensive control variants of the DC motor are possible. These can be found in the catalog included in the download.  Motor start and stop times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Special features:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:146 mm x 177 mm x 34 mm Attention: Individual electrical protection must be carried out on site by qualified personnel! Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

€420.31*
Details
DC-Motorsteuerung-Drehzahlregler-Gleichstrommotoren-Schaltkasten
DC motor control 40 A with control box
Speed ​​control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5–10 kΩ), left-off-right rotation switch and motor control mounted in the control box. The speed control is suitable for DC motorsup to 500 W / 40 A . Motor switch-on and switch-off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Special features:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350 mm x 250 mm x 155 mmAttention: Individual electrical protection must be carried out on site by qualified personnel!   Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

€1,067.43*
Details
DC-Motorsteuerung-Drehzahlregler-Gleichstrommotoren-Schaltkasten
DC motor control 20 A with control box
Speed ​​control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5–10 kΩ), left-off-right rotation switch and motor control mounted in the control box. The speed control is suitable for DC motorsup to 350 W / 20 A . Motor switch-on and switch-off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Special features:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350 mm x 250 mm x 155 mmAttention: Individual electrical protection must be carried out on site by qualified personnel!   Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

€907.86*
Details
This website uses cookies to ensure the best experience possible. More information...