Helical Gear Inverter-motor MV-F273-90-1.1kW-19 rpm

€908.15*

Prices incl. VAT plus shipping costs

Available, delivery time: about 3-4 business days

Mounting position for gearmotors

Product number:

C0273408100733A001TM

Shipping fees:

Article + Packaging

Downloads

Product information "Helical Gear Inverter-motor MV-F273-90-1.1kW-19 rpm"

Helical geared motor with possibility of flange mounting from B3 to B35

Power= 1,1 kW, Speed= 19 upm, Ratio (i)= 73,35, Torque (M²)= 518 Nm, Service factor (fs)= 0,9,
Type = B3 (B35 for an extra charge), Shaft= 35x70 mm,
Weight= 41,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors.

When ordering, please select the desired mounting position and design!

Frequency Inverter
Power= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,
Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,
Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for cooling
needed.

Produktinformatioinen
The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules.
With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers
Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and
integrate the EASYdrive ideally in the control environment of its application.The required optional control variant
must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2
(for 3-phase mains supply), or C1 (for 1-phase mains supply).

! Possible variant selection!

Product selection

When selecting the frequency converter, make sure that there are 3 variants. First, this includes the device
in the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI
operating unit.
The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,
but needs to control a corresponding control panel.
For this purpose, one of the following options must be ordered:

- External HMI device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,
such as Start-stop, left-right-run etc.
For parameterization, one of the following options must also be ordered:
- External HMI device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency converter with MMI operating unit" does not require an optional operating unit
In addition, a display is included in the device cover. The mentioned options can be used if required.

Programming
The three-phase motor with integrated EASYdrive frequency converter is supplied with some basic functions
reprogrammed. If further parameterization is necessary, we offer these adjustmentsat an hourly rate of 86, - € / net.

Important instructions
This drive is a custom-made product. A resignation or revocation of the purchase is excluded!
All product photos are non-binding examples!

Properties "Helical Gear Inverter-motor MV-F273-90-1.1kW-19 rpm"

Delivery time:	1 week
Performance:	1,1 kW
Rotation speed:	11 to 50 rpm
Series:	M-series
Shaft diameter:	35 mm
Torque:	501 to 1000 Nm

Accesories

Frequency Inverter LS 015-G100-4

Frequency inverter, 1.5kW, 380V- 480V, 1,3A, IP20, including operation panel • V/f control, sensorless vector control selectable• PID controller for advanced process control• High torque throughout the engine speed range• 0.1-400Hz output frequency• 1-15kHz clock frequency• Input voltage range -15% to +10%• Error register: last 5 errors• Analog input 0 to +10Vdc / -10 to +10Vdc• 150% torque at 0.5Hz• Degree of protection IP20, UL type 1 (optional)• Torque amplification (boost) manual/automatic• Input signal PNP/NPN selectable• Control and parameter setting for a second motor• Integrated dynamic braking transistor as standard• Automatic tuning: motor vector measurement and autotuning• Integrated communication RS485 (LS Bus / Modbus RTU) with RJ45• Fan with on/off control, easily replaceable

€293.70*

Details

External fan unit size 90

External fan, External fan unit, Motor size 90 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 45 watts, 0.19 A, 2900 rpm, 91 m3/h, capacitor 3µF1x240 V-60 Hz, 55 watts, 0.22 A, 3400 rpm, 91 m3/h, capacitor 3µF3x230/400 V-50 Hz, 40 watts, 0.19 A/0.12 A, 2900 rpm, 91 m3/h3x 254/460 V-60 Hz, 55 watts, 0.19/0.11, 3500 rpm, 91 m3/hPainted RAL5010, total length 185 mm, inner diameter 175 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From €202.78*

Details

Output flange for MN-F272/273 Standard

output flange 200 x 130 x 165

€57.62*

Details

Frequency Inverter LS 0015S100-4EXFNS

Frequency inverter, 1.5 kW, 380V- 400- 420V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€611.86*

Details

Frequency inverter LS 015M100

Frequency inverter , 1.5 kW, 230V, 7.5A, IP20, EMC filter integrated - EMC filter C2 - Potentiometer for speed control - Attachment to mounting plates or DIN rail - Side-by-side installation possible (2 mm distance between the FU) - Easy connection via RJ45 port - Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V) - Brake chopper for 1.5kW and 2.2kW versions - Overload capacity 150% for 1 min - Programming with DriveView9 operating software via RJ45 connection on the M100 (Advanced only! The standard version does not have an RJ45 interface! Please select version.) Excerpt from spec. Features: - DC braking - Jog operation - 3-wire operation - Dwell operation (dwell time operation) - Slip compensation - PID control - Energy saving operation - Speed search - Automatic restart 1.5kW frequency converter (single-phase) buy cheap!

From €195.91*

Details

Frequency inverter LS 0015-iS7-4-SPFD

Frequency inverter iS7 – the all-rounder 1.5 kW, 3x400V, 4A, Braking resistor, IP54 , EMC filter, DC reactor, With control panel. ● Constant torque / Variable torque for normal load and heavy duty operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Undervoltage trip delay) Under Load Trip protectionPMSM function (Permanent Magnet Synchronous Motor) vector control without feedbackPower Braking & Flux Braking function (power and flux brake)Autotuning of static engine parameters ● Easy to use: simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP])● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30HP])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic-capable LCD control panel (6 different languages)● PLC PLC expansion card optional (programmable logic control card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/output expansion card (optional): max. 11 inputs and max. 6 outputs● Optional communication: Profibus-DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *● Software (Drive View) for monitoring and parameterization on the PC

€746.97*

Details

Output flange for MN-F272/273 Opt. 1

MN-F output flange 160 x 110 x 130

€43.23*

Details

Frequency Inverter LS 0015S100-4EOFNS

Frequency inverter, VFD, 1.5 kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€327.74*

Details

Frequency inverter LS 0015-iS7-4-SOFD

Frequency inverter iS7 – the all-rounder 1.5 kW, 3x400V, 4A, Braking resistor, EMC filter, IP21 , DC reactor, with control panel. ● Constant torque / Variable torque for normal load and heavy duty operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Undervoltage trip delay) Under Load Trip protectionPMSM function (Permanent Magnet Synchronous Motor) vector control without feedbackPower Braking & Flux Braking function (power and flux brake)Autotuning of static engine parameters Easy to use:● simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP])● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30HP])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic-capable LCD control panel (6 different languages)● PLC PLC expansion card optional (programmable logic control card):Master-K platform (max. 14 inputs and max. 7 outputs)● Expansion card input/output (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus-DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP● Software (Drive View) for monitoring and parameterization on the PC

€470.06*

Details

Engine options

230V-Option 1.1 kW – 4pol for M-Serie

single-phase option in 1x230V-50Hz, for helical geared reducer motors with 3x230/400V-50Hz mit 1,1kW-Motor in 4pole version, mit Operating and starting capacitor. ! Always operate drive only under load, starting torque lower than with three-phase motor ! ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examples!optional:On / off switch with reversing switch for left / right rotation, undervoltage release,Collar plug = 1 x 230 V, switching capacity = 16 A, ambient temperature = -5 ° C to + 40 ° C,Line between motor and switch housing = approx. 90 cm.

From €27.26*

Details

Brakemotor-Option 1.1 kW – 4pol for M-Serie

Brakemotor-Option 1.1 kW – 6pol for helical gear reducer motors. Brake= 16 Nm 230V with rectifire. ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examplesAll product photos are non-binding examples!

€308.93*

Details