Electric motor IE3 225S-4, 37 kW, 4 pol, B35
Electro motor, Three-phase motor, Power= 37 kW, Speed= 1500 rpm
Shaft= 60 x 140 mm, Voltage= 3 x 400/690 V-50 Hz, 3 x 480/830 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz.
Efficiency class= IE3, Efficiency= 93,9%, Paint= RAL 5010 (gentian blue), Degree of protection= IP55, Temperature sensor= 3 x PTC thermistors,
Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F (155°C), with relubrication device ,
Ball bearing= SKF or equivalent, Cooling= axial fan (Plastic), Motor feet= screwable (if available).
The engine mounting is designed for clutch operation. We recommend reinforced Cylindrical roller bearings for belt drives.
The Electric motor is suitable for frequency converter use and for both directions of rotation.
According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified
specialist personnel. For modifications or special designs please send inquiry.
All product photos are non-binding examples! Technical changes reserved.
| Ambient temperature: | 40 °C |
|---|---|
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 3 |
| Engine protection: | PTC thermistor 3-fold |
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 37 kW |
| Protection class: | IP55 |
| Rotation speed: | 1500 rpm / 4 polig |
| Series: | new series |
| Shaft diameter: | 60 mm |
| Shaft dimensions: | 60 x 140 mm |
| Tension: | 3 x 400/690 V |
| Type of construction: | B3 B5 (B35) |
Accesories
