Electric motor IE3 200L-8, 15 kW, 8 pol, B3
Electric motor, Power=15 kW, Speed=750 rpm, Design=B3
Shaft=55 x 110 mm, Voltage=3 x 400/690 V-50 Hz, 3 x 480/830 V-60 Hz (± 5% according to VDE 0530),
Frequency=50/60 Hertz, Efficiency class=IE3, Efficiency=89.6%, Paint=RAL 5010 (gentian blue),
Protection class=IP55, Temperature sensor=3 x PTC thermistor, Weight=220.0 kg,
Operating mode=S1- 100% ED, Terminal box position=top, Housing=gray cast iron, Insulation class=F (155°C),
Ball bearings=SKF or equivalent, Cooling=axial fan (plastic), Motor feet=firmly cast (if available).
The engine mounting is designed for clutch operation. For belt drives, we recommend reinforced cylindrical roller bearings
The Electric motor is for that Frequency inverter - Use and suitable for both directions of rotation.
According to VDE 0105 and IEC 364, all work on the electric drive can only be carried out by qualified personnel
to be carried out by qualified personnel. If you require modifications or special designs, please send an inquiry.
All product photos are non-binding examples! Technical changes reserved.
| Ambient temperature: | 40 °C |
|---|---|
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 3 |
| Engine protection: | PTC thermistor 3-fold |
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 15 kW |
| Protection class: | IP55 |
| Rotation speed: | 750 rpm / 8 polig |
| Series: | new series |
| Shaft dimensions: | 55 x 110 mm |
| Tension: | 3 x 400/690 V |
| Type of construction: | B3 |
Accesories
