Electric motor IE3 180L-4, 22 kW, 4 pol, B5

€1,126.57*

Product number:

2M21181219A000

Downloads

Product information "Electric motor IE3 180L-4, 22 kW, 4 pol, B5"

Electro motor, Three-phase motor, Power= 22 kW, Speed= 1500 rpm

Shaft= 48 x 110 mm, Voltage= 3 x 400/690 V-50 Hz, 3 x 480/830 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz.

Efficiency class= IE3, Efficiency= 93,0%, Paint= RAL 5010 (gentian blue), Degree of protection= IP55, Temperature sensor= 3 x PTC thermistors,

Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F (155°C),

Ball bearing= SKF or equivalent, Cooling= axial fan (Plastic), Motor feet= screwable (if available).

The engine mounting is designed for clutch operation. We recommend reinforced Cylindrical roller bearings for belt drives.

The Electric motor is suitable for frequency converter use and for both directions of rotation.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified

specialist personnel. For modifications or special designs please send inquiry.

All product photos are non-binding examples! Technical changes reserved.

Properties "Electric motor IE3 180L-4, 22 kW, 4 pol, B5"

Ambient temperature:	40 °C
Direction of rotation:	Left, Right
Efficiency Class:	IE 3
Engine protection:	PTC thermistor 3-fold
Frequency:	50 Hz, 60 Hz
Installation altitude:	1000 m
Kühlungsart:	IC 411
Operating mode:	S1
Performance:	22 kW
Protection class:	IP55
Rotation speed:	1500 rpm / 4 polig
Series:	new series
Shaft dimensions:	48 x 110 mm
Tension:	3 x 400/690 V
Type of construction:	B5
Weight:	176,0 kg

Accesories

Rain cover BG180

Fan cover with rain protection roof for Electric motors in size 180. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.

€166.50*

Details

Slide rails sice 160/180

Motor mounting rails for size 160-180 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 686 mmSlide length: 538 mmWeight: approx. 12.8 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

€206.83*

Details

Motor-slide-plate IEC180-200

Electric motor slide plate in size IEC 180 to 200 Dimensions: 490 x 410 x 40mm (LxWxH)Weight capacity: 282kgWeight: approx. 10.8kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

€247.00*

Details

Thermal sensor opener NAT 130 ° C triple up to BG315

PTO temperature monitoring of the motor winding

€105.34*

Details

Heating tape 160-225

Heating band for a standstill heater for electric motors of size 160-180-200-225 The standstill heater is used to prevent the formation of condensation during breaks in operation.

€187.16*

Details

Cylindrical roller bearing BG180

Cylindrical roller bearing, A-side Reinforced bearing for electric motors of size 180. To accommodate increased radial loads. Minimum load of 20% required!

€156.57*

Details

1-JS-IP66-11KW-15KW-18,5KW-22KW-Frequency-Inverter

Frequency Inverter LS 0220S100-4EXFNS

Frequency inverter, 22.0 kW, 380V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€2,332.69*

Details

Frequency Inverter LS 0220S100-4EOFNS

Frequency inverter, 22.0 kW, 380V- 400V- 420V- 480V, IP20, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€1,507.06*

Details

Frequency Inverter LS 0220H100-4COFN

Frequency inverter for pump / fan operation, 22 kW, 400V, IP20, EMC filter (C3) Specific functions for pumps and fans- MMC function (control of several motors)- Time switch function (time event: real-time clock)- flow compensation- gentle filling- Initial acceleration & final acceleration- valve down ramp- Pump cleaning- load balancing- Fire mode- Energy saving display (amortization counter)- Boost, wake-up function- U / f control- Integrated BACnet communication- LonWorks (optional)- Control panel especially for pumps / fans- Integrated EMC filter / DC reactor- Side by side installation- Intermediate plate option- Small size- Condenser / fan life monitoring function- Smart Copy function (flash drop, download of parameters andof the main operating system possible without Voltage) >

€1,380.34*

Details

Frequency inverter LS 0220-iS7-4-SOFD

Frequency inverter iS7 – the all-rounder 22 kW, 3x400V, 45A, Braking resistor, EMC filter, IP21 , DC reactor, with control panel. ● Constant torque / variable torque for normal load and heavy load operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high-speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Delay of undervoltage trip) Under Load Trip ProtectionPMSM function (Permanent Magnet Synchronous Motor) Vector control without feedbackPower Braking & Flux Braking Function Automatic Adjustment:Autotuning of static engine parameters ● Easy to use:simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP]) *● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30PS])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])Wide, graphic LCD control panel (6 different languages)PLC PLC expansion card optional (programmable logic control card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/Output expansion card (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *Software (Drive View) for monitoring and parameterization on the PC

€1,802.72*

Details

Soft start device 22 kW SSCi-048-V6-C1

Performance data Rated current= 48 A, input voltage= 200 - 575 VAC, protection class= IP20, 22 kW,Installation altitude= <1000 m, dimensions (H x W x D)= 201 x 98 x 165 mm, weight= 2.2 kg, Settings • Current ramp - current value and ramp time• Electric motor current limit• Overload protection trip time• Motor current FLC (full load current)• Ramp stop time• Expected motor start time• Auxiliary relay function Basic Advantages • soft voltage start• easy voltage stop• built-in bypass• current limitation for soft start• soft start plus (limit values adjustable)• thermal motor protection• connection of a motor sensor (thermistor).• 2 relay outputs• protection against exceeding the start-up time All product photos are non-binding examples! Technical changes reserved.

€589.38*

Details

CSA/UL certificate for cast iron motors

Certified and documented CSA/UL certificate 70197087 For gray cast iron motors up to IE3.

€130.55*

Details

Frequency inverter ED400-1850

Frequency Inverter, 3x 400V, EASYdrive 18.5 kW Frequency inverterPower= 18.5 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 40.0 A, Mains current (input)= 33.2 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. All product photos are non-binding examples! Technical changes reserved.

From €2,395.48*

Details