Electric motor IE3 160M-8, 4,0 kW, 8 pol, B35

€564.12*

Prices incl. VAT plus shipping costs

Product number:

2M23123216A000

Downloads

Product information "Electric motor IE3 160M-8, 4,0 kW, 8 pol, B35"

Electric motor, Power=4 kW, Speed=750 rpm, Design=B35

Shaft=42 x 110 mm, Voltage=3 x 400/690 V-50 Hz, 3 x 480/830 V-60 Hz (± 5% according to VDE 0530),

Frequency=50/60 Hertz, Efficiency class=IE3, Efficiency=84.8%, Paint=RAL 5010 (gentian blue),

Protection class=IP55, Temperature sensor=3 x PTC thermistor, Weight=xx kg,

Operating mode=S1- 100% ED, Terminal box position=top, Housing=gray cast iron, Insulation class=F (155°C),

Ball bearings=SKF or equivalent, Cooling=axial fan (plastic), Motor feet=firmly cast (if available).

The engine mounting is designed for clutch operation. For belt drives, we recommend reinforced cylindrical roller bearings

The Electric motor is for that Frequency inverter - Use and suitable for both directions of rotation.

According to VDE 0105 and IEC 364, all work on the electric drive can only be carried out by qualified personnel

to be carried out by qualified personnel. If you require modifications or special designs, please send an inquiry.

All product photos are non-binding examples! Technical changes reserved.

Properties "Electric motor IE3 160M-8, 4,0 kW, 8 pol, B35"

Ambient temperature:	40 °C
Direction of rotation:	Left, Right
Efficiency Class:	IE 3
Engine protection:	PTC thermistor 3-fold
Frequency:	50 Hz, 60 Hz
Installation altitude:	1000 m
Kühlungsart:	IC 411
Operating mode:	S1
Performance:	4,0 kW
Protection class:	IP55
Rotation speed:	750 rpm / 8 polig
Series:	new series
Shaft diameter:	42 mm
Shaft dimensions:	42 x 110 mm
Tension:	3 x 400/690 V
Type of construction:	B3 B5 (B35)

Accesories

Rain cover BG160

Fan cover with rain protection roof for Electric motors in size 160. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.

€124.94*

Details

Motor-slide-plate IEC160

Electric motor slide plate in size IEC 160 Dimensions: 450 x 350 x 40mm (LxWxH)Weight capacity: 160kgWeight: approx. 9.7kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

€201.99*

Details

Slide rails sice 160

Motor mounting rails for size 160 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 530 mmSlide length: 413 mmWeight: approx. 7.2 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

€117.36*

Details

Slide rails sice 160/180

Motor mounting rails for size 160-180 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 686 mmSlide length: 538 mmWeight: approx. 12.8 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

€206.83*

Details

Thermal sensor opener NAT 130 ° C triple up to BG315

PTO temperature monitoring of the motor winding

€105.34*

Details

Frequency Inverter LS 0055S100-4EXFNS

Frequency inverter, 5.5 kW, 380V- 400V- 420V- 480V, IP66, built-in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€755.27*

Details

Frequency Inverter LS 0055S100-4EOFNS

Frequency inverter, VFD, 5.5 kW, IP20, 380V-400V-420V-480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€559.70*

Details

Frequency Inverter LS 055-G100-4

Frequency inverter, 5.5kW, 380V- 480V, 1,3A, IP20, including operation panel • V/f control, sensorless vector control selectable• PID controller for advanced process control• High torque throughout the engine speed range• 0.1-400Hz output frequency• 1-15kHz clock frequency• Input voltage range -15% to +10%• Error register: last 5 errors• Analog input 0 to +10Vdc / -10 to +10Vdc• 150% torque at 0.5Hz• Degree of protection IP20, UL type 1 (optional)• Torque amplification (boost) manual/automatic• Input signal PNP/NPN selectable• Control and parameter setting for a second motor• Integrated dynamic braking transistor as standard• Automatic tuning: motor vector measurement and autotuning• Integrated communication RS485 (LS Bus / Modbus RTU) with RJ45• Fan with on/off control, easily replaceable

€470.42*

Details

Cam switch left-zero-right

Cam switch up to 25A left-zero-right Reversing switch suitable for outdoor use Description: Rated current= 25A, operating voltage= 400V, housing= polycarbonate, Protection class= IP 65, switching angle= 60°L - 0 - R, dimensions: 113 x 113 x 135 mm

€73.45*

Details

Frequency Inverter LS 0055H100-4COFN

Frequency inverter for pump / fan operation, 5.5 kW, 400V, IP20, EMC filter (C3) Specific functions for pumps and fans- MMC function (control of several motors)- Time switch function (time event: real-time clock)- flow compensation- gentle filling- Initial acceleration & final acceleration- valve down ramp- Pump cleaning- load balancing- Fire mode- Energy saving display (amortization counter)- Boost, wake-up function- U / f control- Integrated BACnet communication- LonWorks (optional)- Control panel especially for pumps / fans- Integrated EMC filter / DC reactor- Side by side installation- Intermediate plate option- Small size- Condenser / fan life monitoring function- Smart Copy function (flash drop, download of parameters andof the main operating system possible without Voltage) >

€700.52*

Details

Frequency inverter LS 0055-iS7-4-SOFD

Frequency inverter iS7 – the all-rounder 5.5 kW, 3x400V, 12A, Braking resistor, EMC filter, IP21 , DC reactor, with control panel. ● Constant torque / variable torque for normal load and heavy load operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high-speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Delay of undervoltage trip) Under Load Trip ProtectionPMSM function (Permanent Magnet Synchronous Motor) Vector control without feedbackPower Braking & Flux Braking Function Automatic Setting:Autotuning of static engine parameters ● Easy to use:simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP]) *● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30PS])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic LCD control panel (6 different languages)● PLC PLC expansion card optional (Programmable Logic Control Card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/Output expansion card (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *● Software (Drive View) for monitoring and parameterization on the PC

€617.90*

Details

Soft start in the control cabinet 9.0-12.5 A

Rated current 9.0-12.5 A, with CEE16A, main switch, emergency stop, control fuse Protection class= IP54, dimensions (L x W x H)= 238 x 220 x 148 mm, weight= 2.2 kg, Motor power= 4.0 kW, 5.5 kW, Pre-wired system consisting of motor protection, lockable main switch and a soft starter, in a compact plastic housing. The soft start function slowly accelerates the motors to the rated speed. This significantly reduces the starting currents (no star-delta start necessary). Switching peaks are avoided. There is less mechanical stress. All product photos are non-binding examples! Technical changes reserved.

€799.04*

Details