CMRV063/030 631-4 - 0.12 kW - 1.9 rpm- Worm Gear Motor

€532.57*

Prices incl. VAT plus shipping costs

Delivery time ca. 8-10 Werktage

Product number:

C030063102107500A000T1

Shipping fees:

Article + Packaging

Downloads

Product information "CMRV063/030 631-4 - 0.12 kW - 1.9 rpm- Worm Gear Motor"

Double Worm Geared Motor, Power= 0,12 kW, Speed= 1,9 rpm

Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% In according to the VDE 0530),

Degree of protection= IP55, Insulation class= F (155°C), Operating mode = S1, Type of duty = S1- 100%,

Hollow shaft= 25 mm, Engine Speed= 4 pole, Ratio (i)= 750, Torque= 241 Nm,

Service factor (f.s.)= 0,9, Terminal box= top (rotatable), Weight= 12,57kg. Paint= RAL 5010 (gentian blue),

Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent,

Cooling= axial fan (plastic). The worm geared motor is suitable for frequency converter use and

complies with IEC 60034-30: 2008. The geared motor can be operated in both directions and

contains an oil filling on delivery. Open Hollow shafts are to be closed with caps.

In according to the VDE 0105 bzw. IEC 364 all work on the electric drive must only becarried out by qualified

From gearbox size 110, the installation position must be specified. All product photos are non-binding examples!

Properties "CMRV063/030 631-4 - 0.12 kW - 1.9 rpm- Worm Gear Motor"

Performance:	0,12 kW
Rotation speed:	1 to 4.9 rpm
Series:	CMRV-series
Shaft diameter:	25 mm
Torque:	201 to 300 Nm
Type of construction:	Double worm gear

Accesories

CMRV 063-hollow shaft cover cap

Hollow shaft cover cap for CMRV 063, plastic, black, All product photos are non-binding examples! Technical changes reserved.

€15.67*

Details

CMRV 063-double output shaft

Double output shaft with feather key for worm gear CMRV 063, 25 x 50mm, both sides All product photos are non-binding examples! Technical changes reserved.

€36.06*

Details

CMRV 063 FA output flange

Output flange for CMRV 063 Ø 180 x 115 x 150 mm. B5 All product photos are non-binding examples! Technical changes reserved.

€24.80*

Details

Frequency Inverter LS 0004S100-4EOFNS

Frequency inverter, VFD, 0.4kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€270.89*

Details

Frequency inverter LS 004M100

Frequency inverter , 0.4 kW, 230V, 2.4A, IP20, EMC filter integrated - EMC filter C2 - Potentiometer for speed control - Attachment to mounting plates or DIN rail - Side-by-side installation possible (2 mm distance between the FU) - Easy connection via RJ45 port - Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V) - Brake chopper for 1.5kW and 2.2kW versions - Overload capacity 150% for 1 min - Programming with DriveView9 operating software via RJ45 connection on the M100 (Advanced only! The standard version does not have an RJ45 interface! Please select version.) Excerpt from spec. Features: - DC braking - Jog operation - 3-wire operation - Dwell operation (dwell time operation) - Slip compensation - PID control - Energy saving operation - Speed search - Automatic restart 0.4kW frequency converter for 0.37 kW three-phase motor!

From €137.92*

Details

Frequency Inverter LS 004-G100-4

Frequency inverter, 0,4kW, 380V- 480V, 1,3A, IP20, including operation panel • V/f control, sensorless vector control selectable• PID controller for advanced process control• High torque throughout the engine speed range• 0.1-400Hz output frequency• 1-15kHz clock frequency• Input voltage range -15% to +10%• Error register: last 5 errors• Analog input 0 to +10Vdc / -10 to +10Vdc• 150% torque at 0.5Hz• Degree of protection IP20, UL type 1 (optional)• Torque amplification (boost) manual/automatic• Input signal PNP/NPN selectable• Control and parameter setting for a second motor• Integrated dynamic braking transistor as standard• Automatic tuning: motor vector measurement and autotuning• Integrated communication RS485 (LS Bus / Modbus RTU) with RJ45• Fan with on/off control, easily replaceable

€239.01*

Details

CMRV 063-output shaft

Output shaft with feather key for worm gear CMRV 063, 25 x 50mm All product photos are non-binding examples! Technical changes reserved.

€30.36*

Details

CMRV 063 torque arm

Torque arm for CMRV 063 All product photos are non-binding examples! Technical changes reserved.

€31.73*

Details

External fan unit size 63

External fan, External fan unit, Motor size 63 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 35 watts, 0.15 A, 2950 rpm, 45 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.17 A, 3500 rpm, 45 m3/h, capacitor 3µF3x230/400 V-50 Hz, 30 watts, 0.18 A/0.10 A, 2950 rpm, 52 m3/hPainted RAL5010, total length 185 mm, inner diameter 120 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From €163.51*

Details

Frequency Inverter LS 0004S100-4EXFNS

Frequency inverter, 0.4 kW, 380V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning. Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€503.11*

Details

CMRV 063 FB output flange

Output flange for CMRV 063 Ø 180 x 115 x 150 mm. B5 Depth: 59 mm, All product photos are non-binding examples! Technical changes reserved.

€29.58*

Details

Engine options

230V-Option 0.12 kW – 4pol for CMRV-Serie

single-phase option in 1x230V-50Hz, for worm geared motors with 0.12kW-Motor inlig 4pole version, with Operating and starting capacitor. ! Always operate drive only under load, starting torque lower than with three-phase motor ! ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examples! optional: On / off switch with reversing switch for left / right rotation, undervoltage release, Collar plug = 1 x 230 V, switching capacity = 16 A, ambient temperature = -5 ° C to + 40 ° C, Line between motor and switch housing = approx. 90 cm. optional: On / off switch with reversing switch for left / right rotation, undervoltage release, Collar plug = 1 x 230 V, switching capacity = 16 A, ambient temperature = -5 ° C to + 40 ° C, Line between motor and switch housing = approx. 90 cm.

From €24.41*

Details